User manual

Index
© National Instruments Corporation I-15 NI-DAQ User Manual for PC Compatibles
W
waveform generation application
tips, 3-41 to 3-52
basic applications, 3-41 to 3-43
basic waveform generation with
pauses, 3-44 to 3-46
counter usage, 3-50 to 3-51
double-buffered
applications, 3-47 to 3-48
external triggering, 3-52
FIFO lag effect, 3-51 to 3-52
minimum update intervals, 3-50
reference voltages for analog
output devices
bipolar output polarity
(table), 3-49 to 3-50
unipolar output polarity (table), 3-49
waveform generation functions, 3-39 to 3-41
high-level waveform generation
functions, 3-39
WFM_from_Disk, 3-39
WFM_Op, 3-39
low-level waveform generation
functions, 3-39 to 3-41
WFM_Chan_Control, 3-39, 3-52
WFM_Check, 3-39, 3-52
WFM_ClockRate, 3-39
WFM_DB_Config, 3-40, 4-10
WFM_DB_HalfReady, 3-40, 4-12
WFM_DB_Transfer, 3-40, 4-11
WFM_Group_Control, 3-40
WFM_Group_Setup, 3-40
WFM_Load, 3-40
WFM_Rate, 3-40
WFM_Scale, 3-41
WFM_Set_Clock, 3-41
Web support from National Instruments, A-1
WFM_Chan_Control function, 3-39, 3-52
WFM_Check function, 3-39, 3-52
WFM_ClockRate function, 3-39
WFM_DB_Config function, 3-40, 4-10
WFM_DB_HalfReady function, 3-40, 4-12
WFM_DB_Transfer function, 3-40, 4-11
WFM_from_Disk function, 3-39
WFM_Group_Control function, 3-40
WFM_Group_Setup function, 3-40
WFM_Load function, 3-40
WFM_Op function, 3-39
WFM_Rate function, 3-40
WFM_Scale function, 3-41
WFM_Set_Clock function, 3-41
Windows applications, building, 2-1 to 2-10
BorlandC++,2-7to2-8
Borland Delphi, 2-8
Microsoft Visual Basic, 2-4 to 2-6
Microsoft Visual C++, 2-2 to 2-3
NI-DAQ examples, 2-9 to 2-10
NI-DAQ libraries, 2-1
Worldwide technical support, A-2