Programming instructions

Chapter 25 Measuring Pulse Width
© National Instruments Corporation 25-7 LabVIEW Data Acquisition Basics Manual
Figure 25-8.
Measuring Pulse Width with Intermediate VIs
Buffered Pulse and Period Measurement
With the DAQ-STC chip, LabVIEW provides a buffer for counter
operations. You would typically use buffered counter operations when you
have a gate signal to trigger a counter several times. Figure 25-9 shows the
diagram of the Meas Buffered Pulse-Period (DAQ-STC) VI located in
labview\examples\daq\DAQ-STC.llb
.
Figure 25-9.
Diagram of Meas Buffered Pulse-Period (DAQ-STC).vi