Programming instructions
Index
©
National Instruments Corporation I-9 LabVIEW Data Acquisition Basics Manual
DAQ examples
list of example files, 3-2
locations, 3-1 to 3-2
DAQ hardware.
See
hardware; installation
and configuration.
DAQ Occurrence Config VI, 7-11 to 7-12
DAQ Solution Wizard, 3-1
DAQ-STC counter
continuous pulse train generation,
24-10 to 24-11
controlling pulse width measurement,
25-6 to 25-7
counting operations with no counters
available, 24-20 to 24-21
description, 23-4
determining pulse width, 25-2 to 25-3
dividing frequencies, 28-2 to 28-3
events or elapsed time counting
events, 27-3 to 27-4
time, 27-7 to 27-28
finite pulse train generation
using Advanced VIs, 24-16 to 24-17
using Easy and Intermediate VIs,
24-14 to 24-15
frequency and period measurement
connecting counters, 26-3
high frequency signals, 26-4, 26-6
how and when to measure, 26-2
low frequency signals,
26-8 to 26-9, 26-10
internal timebases with corresponding
maximum pulse width measurements
(table), 25-9
single square pulse generation,
24-4 to 24-6
square pulse generation, 24-2 to 24-3
stopping counter generations, 24-23
DAQ VIs.
See
VIs.
data acquisition.
See also
analog input; VIs.
analog input/output control loops,
6-6 to 6-10
basic LabVIEW data acquisition
concepts, 3-1 to 3-16
data organization for analog
applications, 3-14 to 3-16
limit settings, 3-12 to 3-14
location of common DAQ examples,
3-1 to 3-2
buffered.
See
buffered
waveform acquisition.
common questions about LabVIEW data
acquisition, A-1 to A-4
important terms, 5-17
multiple-channel single-point, 6-3 to 6-5
single-channel single-point, 6-1 to 6-2
triggered.
See
triggered data acquisition.
data acquisition hardware.
See
hardware.
Data Acquisition palette, 3-4
data organization for analog applications,
3-14 to 3-16
column major order, 3-15 to 3-16
row major order, 3-14 to 3-15
two-dimensional (2D) arrays,
3-14 to 3-16
data types for LabVIEW,
xvi
debugging VIs, 29-1 to 29-4
error handling, 29-2 to 29-3
execution highlighting, 29-4
hardware connection errors, 29-1
setting breakpoints and showing advanced
DAQ VIs, 29-4
single-stepping through VIs, 29-3
software configuration errors, 29-2
using Probe tool, 29-4
VI construction errors, 29-2 to 29-4
default input for VIs, 3-7
default setting for VIs, 3-7