Programming instructions

Index
LabVIEW Data Acquisition Basics Manual I-16
© National Instruments Corporation
Microsoft Windows.
See
Windows
environment.
MIO boards.
See
E-series MIO boards; legacy
MIO boards.
multiple-channel single-point analog input,
6-3 to 6-5
multiple-immediate updates, 11-3
multiple-waveform acquisition
choosing between single-point and
multi-point acquisition, 4-4
procedure for acquiring, 7-3 to 7-5
multiplexed mode (SCXI)
analog input modules, 19-4 to 19-5
analog output modules, 19-5
channel addressing, 20-1 to 20-2
digital and relay modules, 19-5
SCXI-1200 (Windows), 19-4 to 19-5
My Single Scan Processing VI, 6-5
N
NI-DAQ software
driver files
deciding which driver version to
use, A-4
Macintosh versions, 2-3
versions of NI-DAQ drivers
(note), 2-1
Windows versions, 2-3
installing
NI-DAQ 4.8.
x
on Macintosh,
2-6 to 2-8
NI-DAQ 5.
x
or 6.0, 2-6
relationship between LabVIEW, NI-DAQ,
and DAQ hardware (figure), 2-3
NIDAQ32.DLL file, 2-3
NIDAQ.DLL file, 2-3
non-buffered handshaking, 17-5 to 17-6
non-referenced signal sources, 5-2
nonlatched digital I/O, 16-1 to 16-3
channel names, 16-2 to 16-3
defined, 15-2
resetting digital lines to default
values, 16-3
using Easy Digital VIs, 16-2
nonreferenced single-ended (NRSE)
measurement system, 5-11 to 5-12
18-channel NRSE system (figure), 5-12
when to use, 5-12
Nyquist frequency, 5-2
Nyquist Theorem, 5-2
O
OBF (Output Buffer Full) line, 17-2
one-point calibration, 22-4 to 22-6
OUT output pin, 23-2
OUT2 signal (table), 13-2
Output Buffer Full (OBF) line, 17-2
P
parallel mode (SCXI)
analog input modules, 19-5 to 19-6
channel addressing, 20-1 to 20-2
digital modules (Macintosh and
Windows), 19-6
SCXI-1200 (Windows), 19-6
parameters for VIs
common DAQ VI parameters, 3-7 to 3-8
conventions, 3-6
pattern generation, 17-2
period measurement.
See
frequency and period
measurement.
PFI5/UPDATE* signal (table), 13-2
polling for analog input, 6-9 to 6-10