Programming instructions

Index
© National Instruments Corporation I-19 LabVIEW Data Acquisition Basics Manual
SCXI calibration, 22-1 to 22-8
EEPROM for storing calibration
constants, 22-1 to 22-3
default load area, 22-2
factory area, 22-2
user area, 22-2
one-point calibration, 22-4 to 22-6
overview, 22-3
signal acquisition, 22-4 to 22-7
signal generation, 22-8
two-point calibration, 22-6 to 22-7
SCXI modules
components
chassis (figure), 19-3
illustration, 19-2
overview, 19-2
hardware configurations
illustration, 19-1
overview, 19-1
Windows or Macintosh systems,
2-9 to 2-10
sampling rate limits for Remote SCXI
(note), 19-3
software configuration
Macintosh systems, 2-10 to 2-13
Windows environment, 2-10
when to use, 4-3
SCXI operating modes, 19-3 to 19-6
multiplexed mode
analog input modules, 19-4 to 19-5
analog output modules, 19-5
channel addressing, 20-1 to 20-2
digital and relay modules, 19-5
SCXI-1200 (Windows), 19-4 to 19-5
parallel mode
analog input modules, 19-5 to 19-6
channel addressing, 20-1 to 20-2
digital modules (Macintosh and
Windows), 19-6
SCXI-1200 (Windows), 19-6
SCXI programming considerations,
20-1 to 20-5
channel addressing, 20-1 to 20-2
gains, 20-3 to 20-5
SCXI-1100 channel arrays, input
limits array, and gains (table), 20-4
settling time, 20-5
SCXI Temperature Monitor VI, 21-9
settling time (SCXI), 20-5
Show Help option, 3-2
Show VI Info option, 3-2
signal conditioning
amplification, 18-3 to 18-4
common transducers (table), 18-1 to 18-2
common types of signal
conditioning, 18-2
conditioning for common types of
transducers/signals (figure), 18-3
defined, 18-2
filtering, 18-4
isolation, 18-4
linearization, 18-5
transducer excitation, 18-5
signal divider, 28-1
signal edges, 23-2
signal voltage range.
See
limit settings.
signals.
See also
analog input signals.
choosing between analog and digital
signal analysis, 4-3
simple-buffered analog input
data buffer overview, 7-1 to 7-2
examples
displaying waveforms on graphs,
7-5 to 7-6
sampling with multiple starts,
7-7 to 7-8
multiple-waveform acquisition, 7-3 to 7-5
single-waveform acquisition, 7-2 to 7-3
waiting to analyze data, 7-1 to 7-2