FAQ

DarbeeVision, Inc.
401 N. Cotswolds Lane, Unit C
Orange, CA 92869
How do I know which version of software and firmware I have?
You can locate the software and firmware versions in the On-screen Menu, on
the page named About.
What is the latest firmware? What issues does the latest version address?
The latest Code Versions are:
Software 2015.10.14 Firmware 2015.09.17
Technical Support
How do I get the DARBEE logo to turn off?
You can turn the DARBEE logo off by going to the On-screen Menu and
selecting Settings --> Logo Properties --> Not Persistent.
I don't see any difference in the image when using the DVP 5000S. What should I do?
First of all, be sure you're looking at a picture that has enough visual content for
the DVP 5000S to work with. Also, it might be helpful to look at slow-moving or still
video so you are not distracted by fast motion. Put the DVP 5000S in Full Pop
Mode and set the Darbee Level to 100% in order to get a strong effect. Then
toggle the Darbee effect on and off to see the difference in place. You can
also use the Demo Mode. Wiping back and forth is most effective, especially on
a still image.
Is it okay to leave my DVP 5000S plugged in all the time?
Yes. The DVP 5000S consumes less than five watts of power.
How do I turn the DVP 5000S off?