FAQ

Can I daisy-chain two or more DVP 5000S' in series? =What is the effect?
You can daisy-chain two or more DVP 5000S' and you will notice a
compounding effect. Most likely you will use a reduced setting for each DVP
5000S.
Operation
How do I get the DARBEE logo to turn off?
You can turn the DARBEE logo off by going to the On-screen Menu and
selecting Settings --> Logo Properties --> Not Persistent.
I don't see any difference in the image when using the DVP 5000S. What should I do?
First of all, be sure you're looking at a picture that has enough visual content for
the DVP 5000S to work with. Also, it might be helpful to look at slow-moving or still
video so you are not distracted by fast motion. Put the DVP 5000S in Full Pop
Mode and set the Darbee Level to 100% in order to get a strong effect. Then
toggle the Darbee effect on and off to see the difference in place. You can
also use the Demo Mode. Wiping back and forth is most effective, especially on
a still image.
Is it okay to leave my DVP 5000S plugged in all the time?
Yes. The DVP 5000S consumes less than five watts of power.
How do I turn the DVP 5000S off?
The DVP 5000S power may be turned off by unplugging the unit at the 5V barrel
plug or at the wall plug. The DVP 5000S does not have a physical switch to cut
the power.
If I unplug the DVP 5000S, will it remember my settings?
Yes, the settings are non-volatile.