Assembly Instructions

Hardware :
8 -- 3.25 cm Screws 1 -- Table Top
8 -- 1.5 cm Screws 4 -- Legs
16 -- Washers 1 -- Shelf
16 -- Lock Washers 1 -- Glass for Table Top
4 -- L-Brackets
1 -- Allen Key
Assembly Instructions :
1. Put (1) lock washer and then (1) washer on each screw.
2. Lay Table Top upside down on clean surface.
3. Line up holes in Legs with inserts on inside of bottom of Table Top. Attach using (2)
3.25 cm screws per Leg. Finger tighten.
4. Line up small hole of L-Brackets with inserts on Legs, making sure long side of L-Bracket
is facing toward Table Top. Attach using 1.5 cm screws.
5. Put Shelf upside down under L-Brackets lining up inserts on bottom of Shelf with holes
in L-Brackets. Attach using 1.5 cm screws.
6. Tighten all screws with Allen Key.
7. Flip table upright and put glass on top.