Assembly And Dressing Instructions

ASSEMBLY AND DRESSING INSTRUCTIONS
IMPORTANT
TURN OFF THE POWER AT THE MAIN
FUSE OR CIRCUIT BREAKER BOX
BEF ORE STARTING INSTALLATION
Spread the arms so that the arms
are at equal
distance from each other.
Make sure that the iron
tubes are assembled
straight relative to the
top and bottom ring
before tightening the
top screws and the
bottom finials.
Mounting bar
Outlet box screw
Ground screw
Lock washer
Hex nut
Nipple
Fixture ground wire
Outlet box
Wire Connector
Main wire
Main wire
Canopy
Collar loop
Chain
Loop
Nipple
Collar ring
(The screws from square ring (small))
Screws
(The screws from iron tubes)
Screws
Square ring
(small)
You will need1-Med.BULB
60 watts Recommended
100 watts Max
Bulb not included
Coupling
Pipe
Socket
Shade
Iron tubes
Retaining ring
Screws
Bottom finials
Square ring
(big)
Arms