Installation & Assembly

Assembly Instruction

1. Identify all parts packed in carton against the parts list. Remove all protective material carefully and avoid

cutting the surface of the furniture while removing the bubble wrap.

2. Put the table top upside down a flat surface. Attach the legs with Big washers and Big lock washers and

nuts, don’t tighten at this time.

3. Connect the legs with the Center Rings, tighten with Bolts, Small washers, Small lock washers.

Progressively tighten all the bolts until secure.

4. Turn the table on its legs, you can adjust foot plugs to level table if needed.

Parts List

Description

Quantity

Table Top

Table Leg

Center Ring

Big Washer

Small Washer

Big Lock Washer

Small Lock Washer

Bolt

Locker Nut

Bolt

Warning: Do not force components and over tighten during assembly.

PAGE 1
Assembly Instruction 1. Identify all parts packed in carton against the parts list. Remove all protective material carefully and avoid cutting the surface of the furniture while removing the bubble wrap. 2. Put the table top upside down a flat surface. Attach the legs with Big washers and Big lock washers and nuts, don’t tighten at this time. 3. Connect the legs with the Center Rings, tighten with Bolts, Small washers, Small lock washers. Progressively tighten all the bolts until secure. 4.