Instructions

IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
Organize your parts and
hardware.
Wooden componenets should include:
A) 1 Top B) 4 Legs
C) 1 Square D) 1 Stem
Hardware includes:
E) 4 Small Bolts F) 4 Large Bolts
G) 1 Allen Wrench
INSTRUCTIONS
Step 1: Slide metal leg conncetor (B) into
metal grooves located on the stem (D).
See gure 1 to the right.
Step 2: Align square (C) drilled holes with
holes drilled in top of stem (D). Insert 4
small bolts (E) into holes and tighten using
allen wrench (G).
E F G
A
B
C D
D
B
Fig. 1
C
Step 3: Flip over Fig. 2 and align holes in (C) with
drilled holes in top (A) see gure 3. Insert 4 large
bolts (F) into holes on (C) and tighten using allen
wrench (G).
C
D
B
Fig. 2
C
A
C
D
B
A
Fig. 3
Step 4: Place table upright.
Any problems or questions call us.