Installation & Assembly

G
H
H
HARDWARE LIST
A (10) M8*50mm Bolts
B (10) M8 Spring Washers
C (14) M8 Flat Washers
D (4) M8 Nuts
E (1) Ø 5 Allen Wrench
F (1) Ø 5 Open Wrench
PARTS LIST
G (1) Headboard Panel
H (2) Headboard Legs
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
QTYPART HARDWARE QTYPART HARDWARE
1E 1F
14C 4D
10A 10B
A
FIGURE 1
Back
of Leg
H
B
C
A
B
C
A
B
C
STEP 1 - Figure 1
Begin assembly by attaching Legs (H) to
Headboard (G) using 3 Bolts (A), 3 Spring
Washers (B) and 3 Flat Washers (C) per side.
Tighten all bolts with Allen Wrench (E) provided.
FIGURE 2
STEP 2 - Figure 2
Next attach Side Rails (sold separately) onto
Legs (H) using 2 Bolts (A) and 2 Flat Washers
(C) on the front and 2 Hex Nuts (D), 2 Spring
Washers (B) and 2 Flat Washers (C) on the back.
Tighten all bolts with Allen Wrench (E) provided.
Tighten all nuts with Open Wrench (F) provided.
Holes
for
Metal
Frame
(Sold Separately)
Side Rails
The Bed Frame is not
included. Sold Separately
**
H
H
H
AA
B
B
C
C
C
C
D
D
Twin • Full
Queen • King
UPH HEADBOARD
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to
insure that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference.
Adult assembly is required