Installation & Assembly

ManualsBrandsDarby Home Co ManualsBronze Outdoor Hanging LightsHaubstadt Patina Bronze 3 -Bulb 28.25'' H Outdoor Hanging Lantern

Installation Instructions for

Oakmont Outdoor Pendant

1.0

OL13109

Outdoor

OL13109

Install the candle followers to the top of the candle tubes.

Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.

Insert the glass panels into the shade, then secure them by installing the brackets using the screws and washers.

Install the shade to the fixture using the shade screws.

Install a hex nut and washer onto the threaded pipe, then screw the threaded pipe to the bottom of the shade.

Place the cup onto the threaded pipe and secure it in place using the other washer and hex nut, then screw on the finial.

Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.

CAUTION RISK OF FIRE-

This product must be installed in accordance with the

applicable installation code by a person familiar with the

construction and operation of the product and the hazards

involved.

Use minimum 90°c supply conductors.

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing NEC compliant junction

boxes.

This product is safety listed for damp locations.

Incandescent lamps may be dimmed with a standard incandescent dimmer.

LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for

additional information.

SCREW AND WASHER

BRACKET

SHADE

LAMP

SHADE SCREW

CANDLE FOLLOWER

HEX NUTS AND WASHERS

CUP

FINIAL

THREADED PIPE

GLASS PANEL

Summary of content (4 pages)

PAGE 1
Installation Instructions for OL13109 OL13109 Oakmont Outdoor Pendant 1.0 Outdoor GENERAL PRODUCT INFORMATION: CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations.
PAGE 2
MISE EN GARDE - RISQUE D'INCENDIE Ce produit doit être installé selon le code d’installation pertinent , par une personne qui connaÎt bien le produit et son fonctionnement ainsi que les risques inhérents Les fils d’alimentation doivent convenir pour 90°c. 1A 7 AMPOULE VIS ET RONDELLE SUPPORT SUIVEUR DE BOUGIE 3 PANNEAU DE VERRE 4 VIS DE ABAT-JOUR ABAT-JOUR TUYAU FILETÉ 5 ECROUS HEX ET RONDELLES COUPE 6 FLEURON 1 Installez les suiveurs de bougie au sommet des tubes de bougie.
PAGE 3
ADVERTENCIA - RIESGO DE INCENDIO Este productor debe ser instalado segun el codigo de instalacion aplicable por una persona que conozca la constussion y el funcionamiento del producto y los riesgos que supone. Conductores de alimentacion 90°c Min. 1A 7 BOMBILLA TORNILLO Y ARANDELA SOPORTE SEGUIDOR DE VELA 3 PANELE DE VIDRIO 4 TORNILLO DE PANTALLA PANTALLA TUBO ROSCADO 5 TUERCAS HEX Y ARANDELAS COPA 6 FINIAL 1 Instale los seguidores de la vela en la parte superior de los tubos de la vela.
PAGE 4
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 60077 800.969.3347 www.Feiss.com © 2017 Feiss.All rights reserved.The "Feiss" graphic is a registered trademark of Feiss. Feiss reserves the right to change specifications for product improvements without notification.