Assembly Instructions ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a S-point system that shows the degree of effort needed in Alien Wrench assembling a specific product {with 1 being easy and ยง being difficult). For some Phillips Screwdriver products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
1. Prepare 2 Holt assemblies by first inserting a lock washer HD) root the bolt (8B) then a flat washer (HE) onto that same bolt (iB). #8 x PCS #D x 2PC8 #E x PCS 2. Place the backrest (#1) onto a protected surface, then align the seat (82), Invert the bold assemblies info the center holes amid secure using the Allen wrench (HF), #A x PCS #D x PCS #E x PCS 1.
1. Adage the front legs #3) to the from comer of the seat 2], make sure to Insert the log supports vain the slots as you align the front legs. HC x PCS #D x PCB HE PCs first inserting a hock washer {B08 onto the bolt MC) then a fiat washer (BE) onto that same Bolt (#03, Then insert 2 bolts into each front corner and secure using the Allen wench, Insert a screw HE) into each end of the: leg supports (84,51.
