Assembly Instructions

ASSEMBLY INSTRUCTIONS

(

Pedestal)

GW : 33 LBS

Description:

DOUBLE PEDESTAL DINING TABLE WITH 17" BUTTERFLY LEAF

- 1 -

Dimension : 40”Wx67.37”/59”Lx30”H

Cube size : 61.4”x42”x6.7” NW :88 LBS

(Top)

GW :99 LBS

Cube size : 26.7”x18.5x7.4” NW : 28.6 LBS

PAGE 1
ASSEMBLY INSTRUCTIONS Description: DOUBLE PEDESTAL DINING TABLE WITH 17" BUTTERFLY LEAF Dimension : 40”Wx67.37”/59”Lx30”H Cube size : 61.4”x42”x6.7” NW :88 LBS (Top) GW :99 LBS Cube size : 26.7”x18.5x7.4” NW : 28.
PAGE 2
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
PAGE 3
STEP 1 Attach crossbar (D) and legs (C) to pedestals (B) with nuts (1), washers (2) and (3) as shown below. Tighten with wrench (4). C C 2 D C B STEP 2 Carefully put Top (A) on pedestals (B).Attach Top (A) to pedestals (B) with hexagon nuts (1), washers (2) and (3) as shown below. Tighten with wrench (4).
PAGE 4
STEP 3 Unlatch 2 end pieces of table top by the latches underneath table top. Pull the 2 ends of the table top apart. STEP 4 Unfold the butterfly leaf with the apron at both ends straightened up as shown on the Step 6. Place flattened butterfly leaf at the center of the table. Then push two end pieces inward making sure all pins & holes aligned.