Note: Left and right is determined by facing the front of the headboard in its upright position. 1. Insert a dowel (#A) into the top hole on each end of the headboard (#1). 2. Insert the other end of the dowels (#A) into the pre-drilled holes along the top of the right/left headboard legs (#2,3). Make sure to insert the sides of the headboard (#1) into the designated slots along the legs (#2,3). 1. Insert a bolt (#B) into the top holes located on the outer sides of the legs (#2,3).
Note: Left and right is determined by facing the front of the footboard in its upright position. 1. Insert a dowel (#A) into the top hole on each end of the footboard (#4). 2. Insert the other end of the dowels (#A) into the pre-drilled holes along the top of the right/left footboard legs (#5,6). Make sure to insert the sides of the headboard (#1) into the designated slots along the legs (#2,3). 1. Insert a bolt (#B) into the top holes located on the outer sides of the legs (#5,6).
2. Align the brackets (#J) to each rail end and footboard/headboard. Insert 4 screws (#I) into each bracket and secure using a Phillips screwdriver. 1. Hook the ends of the side rails (#7) into the slots along the headboard/footboard legs. 1. Insert the threaded ends of the slat support legs (#9) into the pre-drilled holes along the sides of the slats (#8). 2. Insert a screw (#H) into each end of the slats (#8). Secure using a Phillips screwdriver.