Assembly Instruction

CAUTION:

Care and Cleaning

PIECE

DESCRIPTION

PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE

QUANTITY

Mounting bar

Canopy

Chain

Read instruction carefully and turn electicity off at main circuit breaker panel before

beginning installation.

Out ring

Lock

Part List and Hardware List

Do not use any cleaners with chemical,solvents or harsh abrasives.Use Only a dry soft

cloth to dust or wipe carefully.

Estimated Assembly Time: 30 minutes

To clean the outside fo the fixture,use a dry or slightly dampened clean cloth(use clean

water,never a solvent)to wipe the surface of the fixture.

To clear the inside of the fixture,first disconnect power to the fi

xture by turning off the circuit

breaker or by removing the fuse at the fuse box.Next,use a dry or slightly damperned clean

cloth(use clean water,never a solvent) to wipe the interior surface of the fixture

Mounting screw

Suspender

Fixture frame

Socket sleeve

Bulb

Central fixture

Wire nut

PAGE 1
Assembly Instruction CAUTION: Read instruction carefully and turn electicity off at main circuit breaker panel before beginning installation. Care and Cleaning To clean the outside fo the fixture,use a dry or slightly dampened clean cloth(use clean water,never a solvent)to wipe the surface of the fixture. To clear the inside of the fixture,first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
PAGE 2
Installation Step 1 Unpack all parts from cartons carefully suspender(F)to the hook(C）of the central fixture (J),another end (F2) to the hook (L) of the fixture frame(G) Place socket sleeve (I) and bubl（H）to the socket Thread one end of chain(E) to the fixture lock(M) A B C D E M C1 F1 F J F2 L H I G Step 2 Wire connection Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outlet Supply Wire to: White Black * Parallel Cord(round & smooth) * Parallel Cord(square& ridged) Clear,