Installation & Assembly

ASSEMBLY INSTRUCTIONS



















 









FIG



!PC







PAGE 1
ASSEMBLY INSTRUCTIONS ASSEMBLY TIPS: 1. Remove hardware from box and sort by size. 2. Please check to see that all hardware and parts are present prior to start of assembly. 3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly. Warning! • 1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2. This product is for home use only and not intended for commercial establishments.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP2 0 \ STEP3 COMPLETE '- ---
PAGE 3
ANTI-TIPPING INSTALLMENT INSTRUCTIONS This tip restraint must be attached to a wall stud using long screw enclosed. STEP 1 Attach a bracket securely to the back top rail of the furniture using short screw provided, through the smaller hole. STEP 2 Locate the other bracket on the wall over a wall stud and two inches below the mounting bracket secured to the back of the furniture. Attach the wall stud using the long screw provided, through the smaller hole.