Description: P.1/4 SIDE CHAIR Product Size: 18.5" x 22.25" x 40.5" H Your furniture purchase is an investment. Here are a few tips to maximize the lifetime of your furniture with 8 minimum amount of effort, Properly caring for your furniture can help ensure that it looks great year after year. ‘Wood Furniture Maintenance: Always dust, wipe, and clean with the grain of the Wood. Dust with » soft cloth, Dust will scratch the furniture surface if zot removed properly.
P.2/4 ASSEMBLY INSTRUCTIONS DO NOT FULLY TIGHTEN ALL BOLTS UNTIL THE ENTIRE UNIT IS COMPLETELY ASSEMBLED Step 1 : Place the Chair Back (A) on the floor. Attach the Seat Box w/Wood Seat (B) to the Chair Back (A) by using Flat Washer (4), Lock Washer (3), Long Bolt (1) into the holes at the rear corner block of the seat box. Insert Flat Washer (4), Lock Washer (3), Short Bolt (2) into the holes at the rear bar of the seat frame. Tighten all bolts with Hex Wrench (6). Do not fully tighten.
PART LIST P.3/4 (A) CHAIR BACK (B) SEAT BOX W/ (C) FRONT LEG (1PC) WOOD SEAT (1 PC) (PCS) HARDWARE PACK NO.
P.4/4 COMPLETE HARDWARE CHAIR BACK ‘WOOD SEAT SEAT BOX FRONT LEG PRODUCT DETAILS CHAIR BACK RUBBER WOOD/ MANGO WOOD/ PLY WOOD SEAT BOX RUBBER WOOD / PLY WOOD WOOD SEAT RUBBER WOOD FRONT LEG MANGO WOOD PRODUCT SIZE x 40.5"H CARTON SIZE NET WEIGHT 39.6 LBS GROSS WEIGHT 48.
' Dining Chairs Assembly Troubleshooting Guide The most important element of correct chair assembly is to tighten the bolts as directed. Prematurely tightening the bolts can lead to numerous issues and will lengthen the assembly time. Listed below are the most common issues in chair assembly and their easy solutions. PROBLEM: Chair is level. Cause 1: Level chairs can occur if the bolts are fully tightened before all bolts are attached.