Owner Manual

PIECE QUANTITY
1X
A
1X
B
1X
C
1X
D
1X
H1 8X
Weight Capacity: 275 lbs
H2 8X
WARNING: DO NOT STAND ON CHAIR
H3 8X
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
H4 1X
ASSEMBLY INSTRUCTIONS APPLICABLE FOR ALL
VANITY CHAIRS.
THE DESIGN OF THE CHAIR IN THE DRAWINGS MAY
VARY FROM YOUR ACTUAL CHAIR, BUT ASSEMBLY IS
THE SAME ON ALL MODELS.
Allen key
Allen bolt
Spring washer
Flat washer
The legs and hardware are located underneath the chair in the
zipper compartment.
Front leg-B
Back leg-C
Back leg-D
DESCRIPTION PICTURE
SEAT
Front leg-A
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Parts List and Hardware List