ASSEMBLY INSTRUCTIONS Description : CORNER SHAKER DESK W/PENCIL DRAWER Printed in Vietnam -1-
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased.
PART LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: NO Description Qty A Table Top assembly 1 Sketch NO Description Qty B Table Legs 3 Sketch HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty 1 Flat Washer (8.
STEP 1 Attach the legs (B) to the top (A) with washers (1) and (2) and nuts (3) as shown below. Tighten with the wrench (4). STEP 2 Attach the knob (5) to the front of drawer with the pan head screw (6) as shown below. Tighten with a screwdriver.