Instructions User guide

14
SPLIT POINT OFFSET Refer to infor-
mation on page 29
TOOLS, OFFSET & MAINTENANCE
PAGE Refer to information on page
27
QUICK START SET UP SCREEN
* Found only in software with date code of
70129 or earlier
CONIC GRIND - MAIN SET UP
SCREEN AND QUICK START Refer to
information on page 25
CONIC STANDARD SPLIT GRIND -
QUICK START Refer to information on
page 25
FACET GRIND - MAIN SET UP SCREEN
AND QUICK START Refer to informa-
tion on page 25
FACET STANDARD SPLIT GRIND -
QUICK START Refer to information on
page 25
118-DEGREE POINT ANGLE - QUICK
START Refer to information on page
25
135-DEGREE POINT ANGLE - QUICK
START Refer to information on page
25
CANCEL AND RETURN TO MAIN SET
UP SCREEN
MAIN SET UP 2
ND
LEVEL SCREEN ICONS
“INCHES” - METHOD OF MEASURE-
MENT Refer to information on page
20
“METRIC” - METHOD OF MEASURE-
MENT Refer to information on page
20
ADVANCE Refer to information on
page 21
AUTO MODE SELECTOR Refer to in-
formation on page 20
MANUAL ALIGN KEY Refer to infor-
mation on page 21
CANCEL KEY
SAVE CHANGES
BACKSPACE WILL ERASE TEXT
TOOLS, OFFSET & MAINTE-
NANCE SCREEN 2
ND
LEVEL
ICONS
SPACE Refer to information on page
24
DELETE FILE KEY Refer to informa-
tion on page 24
SAVE SCREEN - TO FLASH MEMORY
Refer to information on page 27
FILE OPEN Refer to information on
page 27
CURSOR DOWN ARROW
CURSOR UP ARROW
PAGE DOWN ARROW
PAGE UP ARROW
TO MOVE A MACHINE AXIS IN THE
POSITIVE DIRECTION
TO MOVE A MACHINE AXIS IN THE
NEGATIVE DIRECTION
HONE TIMING ADJUSTMENT Refer to
information on page 31
SCREEN CONTRAST ADJUSTMENT
Refer to information on page 31
TOUCH SCREEN SENSITIVITY AD-
JUSTMENT Refer to information on
page 32
Touch Screen Icon Reference