User's Manual
Table Of Contents
- Introduction
- Identifying headphone components
- Charging the headphones and Bluetooth adapter (select models only)
- Using the headphones with the audio line-in cable
- Using the headphones with the enclosed Bluetooth adapter (provided with select models only)
- Using the headphones with a Bluetooth-enabled computer
- Terminating the headphone wireless connection
- Index
Terminating a wireless connection with the enclosed
Bluetooth adapter (select models only)
To terminate the connection, complete the following steps:
1. Slide the Bluetooth switch located on the left ear cup to turn off the headphones and deactivate
Bluetooth.
2. If this was the first use of the headphones and Bluetooth adapter, and the pairing switch is in the
on position, slide the pairing switch up to turn off pairing. In subsequent use, it is not necessary to
turn on pairing to establish a wireless connection with the Bluetooth adapter.
3. Slide the power switch to turn off the Bluetooth adapter (1).
4. Unplug the Bluetooth adapter from the audio-out (headphone) jack (2) of your computer or audio
device.
20 Chapter 7 Terminating the headphone wireless connection ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/