User's Manual
1
User’s Manual Guide
Hardware Installation
1.Connecting the receiver module
Note:
- For optimal performance, place the receiver at least 8 inches (20 cm) away from any
electronics devices (ex. computer, monitor, etc.) to avoid interference.
- If placing the receiver on metal surface, please use a non-metal pad under it.
2. Load batteries in optical mouse ( 2 AA batteries)
3. Syncranizing the receiver and wireless mouse
For USB Interface
- Plug the receiver cable into the USB port of your system.
- System will automatically detect for new hardware.
- Follow system instruction for setup
For USB and PS/2 Combo (If no USB port)
- Connect the PS/2 adaptor to the USB connector of the receiver.
- Restart your system.