User's Manual

Welcome
Congratulations on your purchase of the BenQ x750 wireless keyboard
and mouse. Simply follow the instructions in this guide, and in a few
minutes you’ll be enjoying the freedom of wireless technology and the eye-
pleasing efficiency of a clutter-free desktop.
1. Insert the Batteries & How to Recharging
You’ll find batteries for the keyboard and mouse included in this package.
If you need to replace the batteries in the future, make sure that you use
new batteries and that you change all of the batteries at the same time.
Alkaline batteries are recommended.
Step 1: Turn both the mouse upside down.
Step 2: Carefully remove the battery compartment covers.
Step 3: Insert new batteries, making sure to properly orient the positive (+) and
negative (-) ends as specified by the battery compartment labels.
Step 4: Gently slide the battery compartment covers back into place.
2. Hardware Installation
The cradle and dongle give the keyboard and mouse the ability to
communicate with your computer.
Step 1: Plug the USB connector of dongle into your computer’s rectangular USB port.
Step 2: System will automatically detect the new hardware.
3. Establish a Wireless Connection
Boot Mode (without installing software, and there is no hotkey function)
Step 1: Plug the USB connector of dongle into the computer’s usb port.
Step 2: The Windows OS will add new hardware, and you can finish this process
step by step.
Step 3: Push the paring connect button of mouse, and then push the button of dongle
until the LED is lighting glitteringly.
4. Software Installation (for hot key functions)
Step 1: Insert Q-Point™ driver CD into CD-ROM or DVD-ROM drive.
Step 2: The installation program should run automatically. If not, go to “My Computer”,
select your CD-ROM or DVD-ROM drive, and double click “setup.exe”
Step 3: The onscreen setup program will appear and guide you through rest of the
Installation procession.