User's Manual

Subject: PRODUCT ENGINEERING
SPECIFICATION
Part No.: 9Z.P5E**.***; Rev.: 0
Doc. No.:
201-C001
Project Code:
9Z.P5E81.001
Page 13 of 33
Model Name:
U10B
Release Notice
Figure. Keyboard Bending Strength
With the keyboard is placed on the bench supporting both at top and bottom end,
applying 9.8N (1 kgf) load to the center of keyboard, the keyboard bending should be
5mm maximum. During the test, the keycaps and scissors should not dislodge. After
the testing, the keyboard should be fully functional without any degradation and
mechanical damages.
4. Environment Test Specification
4.1 Environment test items for keyboard function:
4.1.1 High Temperature Operation
The keyboard shall be operable at 60
o
C without condensation continuously for a minimum 48 hrs.
There must be no evidence of internal corrosion or bacteria – fungus growth after the test.
4.1.2 High Temperature and High Humidity Operation
The keyboard shall be operable at 60
o
C at 90% humidity without condensation continuously for a
minimum 48 hrs. There must be no evidence of internal corrosion or bacteria – fungus growth after the
test.
Form No.: A-01-001-09(111107) 保存期限:最新狀態 保存單位:eGRNSystem
過期處置:背面紙