User's Manual

Subject: PRODUCT ENGINEERING
SPECIFICATION
Part No.: 9Z.P5E**.***; Rev.: 0
Doc. No.:
201-C001
Project Code:
9Z.P5E81.001
Page 20 of 33
Model Name:
U10B
Release Notice
8. Thermal Ink Transfer H or harder
9. Plated Finish H or harder
10. Conductive Coatings H or harder
11. NCVM H or harder
12. ED H or harder
13. Carbon Fiber Composite H or harder
c. Cure (Solvent Resistance) (ASTM D4752)
Test Parameters:
1. 2K low bake 50 double rubs MEK (100%)
2. 1K high bake 50 double rubs MEK (100%)
3. Powdercoat 50 double rubs MEK (100%)
4. UV 50 double rubs MEK (100%)
5. 1K low bake 50 double rubs IPA (70%)
6. Soft Touch 50 double rubs MEK (100%)
7. IMR 50 double rubs MEK (100%)
8. Thermal Ink Transfer 50 double rubs MEK (100%)
9. Plated Finish 50 double rubs MEK (100%)
10. Conductive Coatings 50 double rubs MEK (100%)
11. Silk Screen / Pad Print 50 double rubs IPA (70%)
12. NCVM 50 double rubs MEK (100%)
13. ED 50 double rubs MEK (100%)
14. Carbon Fiber Composite 50 double rubs MEK (100%
IPA – Isopropyl Alcohol - CAS # 67-63-0
MEK – Methyl Ethyl Ketone - CAS # 78-93-3
Form No.: A-01-001-09(111107) 保存期限:最新狀態 保存單位:eGRNSystem
過期處置:背面紙