User's Manual

Subject: PRODUCT ENGINEERING
SPECIFICATION
Part No.: 9Z.P5E**.***; Rev.: 0
Doc. No.:
201-C001
Project Code:
9Z.P5E81.001
Page 26 of 33
Model Name:
U10B
Release Notice
5.6 Water Spill test
Equipment required for test: Kept at room temperature, Water, Small containers
Use a syringe or small container to pour 20cc (20 mL, about 2/3 fluid ounce) of water on three evenly
spaced spots on the keyboard: A and S, G and H L and ;. The total liquid will be 60cc (60mL, about
2.03 fluid ounces).The spill locations are between the following keys. Wait 60 minutes then remove the
liquid from the keyboard, taking care to limit the motions to only one axis ,type on all keys to verify
functionality.
5.7 Coke Spill test
Equipment required for test: Kept at room temperature, Diet Coke
TM
, Small containers
Use a syringe or small container to pour 20cc (20 mL, about 2/3 fluid ounce) of Diet Coke™ on three
evenly spaced spots on the keyboard: A and S, G and H L and ;. The total liquid will be 60cc (60mL,
about 2.03 fluid ounces). The spill locations are between the following keys.
Immediately tilt the keyboard towards its left side in an attempt to remove the liquid from the system,
taking care to limit the motions to only one axis
Wipe down surfaces of system with paper towels for exactly 45 seconds to remove as much visible
moisture as possible. Wait 60 minutes type on all keys to verify functionality.
5.8 UV Stability
The keyboard UV stability shall be in compliance with ASTM D4674 - 89. The test is applied to the color
of the key caps and legend. After the test, the materials used in the keyboard, shall not exhibit
significant cosmetic defects such as fading, flaking, crazing, or color change with ∆E of 1.0 or above.
The mechanical properties of the materials shall not be degraded to an extent which causes the system
to fail any of the life, shock or vibration tests.
5.9 Hot plate test
The Keyboard must put on temperature 80℃ hot plate, It need to endure 24 hour test, If the
keyboard function OK this test is pass, else is fail.
Form No.: A-01-001-09(111107) 保存期限:最新狀態 保存單位:eGRNSystem
過期處置:背面紙