User's Manual
Table Of Contents
- 1. Introduction
- 2. Electrical specifications
- 3. Mechanical Specification
- Part
- 4. Environment Test Specification
- 5. Durability
- 6. Keyboard Layout
- Appendix A (Appearance Spec)
Subject: PRODUCT ENGINEERING
SPECIFICATION
Part No.: 9Z.P5E**.***; Rev.: 0
Doc. No.:
201-C001
Project Code:
9Z.P5E81.001
Page 8 of 33
Model Name:
U10B
Release Notice
MCS-A0C8 for U10B
Color of legend:
Print (Panton coolgray 8c)
(3) Note: Specification of keycap color comparison.
Refer to appendix A.
3.1.7 Flammability of materials (Unless otherwise specified):
Part
Material UL grade Note
Keycap
ABS PA 758 – U10B BL
ABS PA 757 – U10B NBL
94 – HB
Paint + Laser Etching – U10B
Print – U10B
Rubber dome/return spring
Silicone (transparent) 94 – HB
Membrane
PET
94 – VTM2
Support plate
Stainless(SUS 304) – U10B
Thickness: 0.2mm
Scissors mechanism
POM or Darfon approved equivalent
94 – HB
3.1.8 Key Switch Function
The keyboard should have well switch function by following definition.
Key-in SPEC as below:
Test probe diameter :
∅
4.0mm
1. The measurement of P1 at corner < Nominal P1 at center *1.5
2. The force of fire point at corner< the P1 at corner
A. Small keys(Key size < 1.0X)
Form No.: A-01-001-09(111107) 保存期限:最新狀態 保存單位:eGRNSystem
過期處置:背面紙