User guide

III. Using the telephone LJ-100

How to make a call

To make a call:

♦ lift the handset from the base unit

♦ press the SP-PHONE button.

The display will show the timer.

♦ When the PTT on-line signal is heard, the

required number should be dialed. The

number will be displayed. After several

seconds, the call time counter will be

switched on.

♦ To end your conversation, replace the

handset on the base unit or press the

SP-PHONE button. The time of your last

call can be displayed by pressing the

OUT/X button (see the chapter: ”OUT

memory”)

Note!

The telephone number in the standby mode can also be entered (before lifting the handset or

pressing the SP-PHONE button).If you wish to delete the last incorrect digit, press the

DEL/TIME button. If you wish to make a call, press the BACK

button. The 2-way speaker

function will be switched on and the number will be dialed automatically.

# How to receive a call

When the telephone rings:

♦ lift the handset from the base unit or press

the SP-PHONE button.

In addition, on the side of the handset there is

the rotary switch, which can be used to adjust

the volume of the handset or the VOLUME

HI/LOW rotary switch to adjust the volume of

the base’s loudspeaker.

♦ After completing your conversation,

replace the handset on the base unit or

press the SP-PHONE button.

SP-PHONE

BC DEF

GHI JKL MNO

PQRS TUV WXYZ

OPER

SP-PHONE