User guide

III. Using the telephone LJ-100

OUT memory

Your telephone can store 30 the most recently dialed numbers in the OUT

memory. They can be reviewed by pressing the OUT/X button in standby

mode. Each number may consist of up to 16 digits.

To review OUT numbers:

♦ press the OUT/X button. The display

shows the last number dialed.

♦ Press the OUT/X button again to display

the time of this call and the number of the

memory location.

♦ Press the OUT/X button again. The

display shows the number, stored in the

lower memory location.

♦ Press the OUT/X button again to display

the time of this call and the number of the

memory location.

♦ By pressing the OUT/X button, the

remaining numbers can be reviewed.

If the OUT/X button is not pressed, the telephone will return to standby mode

after several seconds. If the memory is empty, the display will show the

symbol - - - End - - -.

To make a call:

♦ press the OUT/X button to select the

number .

♦ Press the BACK/÷

÷÷

÷. button. The 2-way

speaker function will be switched on and

the number will be dialed automatically.

♦ After the call, replace the handset on the

base unit or press the SP-PHONE button.

How to delete an OUT number

To delete an individual number:

♦ press the OUT/X button to select the

number, to be deleted.

OUT/x

BACK/

SP-PHONE

OUT/x