User guide

III. Using the telephone LJ-100

♦ Press the DEL/TIME button twice. The

number will be removed.

To delete the all numbers:

♦ Press the OUT/X button.

♦ Press and hold the DEL/TIME button until

- - - End - - - is displayed. After several

seconds, the telephone will return to

standby mode. All numbers will be

removed.

# Last number redial

Your telephone automatically stores the last number dialed of up to 32

digits long. This function can be used, when the number is busy.

To redial:

♦ lift the handset or press the SP-PHONE

button.

♦ Press the RD/ARD button. The last

number will be displayed and dialed.

# Autoredial function

The Autoredial function allows the last number to be redialed during the

using the 2-way speaker button. This operation can be repeated many

times, until a connection is made.

To dial the number again:

♦ press the RD/ARD button. The 2-way

speaker function will be switched off

briefly. After an interval, the 2-way

speaker function will be switched on and

the number will be dialed again

automatically.

# How to enter a pause

With some switchboards, after dialing the access code you may have to

wait for a moment while the switchboard picks up an outside line. To

compensate for this, you can enter a pause within a phone number.

DEL/TIME

SP-PHONE

RD/AR