User guide

III. Using the telephone LJ-100

Note!

1. Storing a number in the memory automatically deletes any previous number kept under the

individual code number you choose.

2. The stored numbers can be reviewed in the standby mode. To display the number from the

code number key:

! press the RECALL button,

! press the code number key. The number will be displayed.

! How to delete a number from one-touch and two-touch memory

During the review:

♦ Press the DEL/TIME button twice. The

number will be removed. The telephone

will return to standby mode.

# Flash function

This allows various switchboard facilities such as call transfer and

conference calls to be used. Contact your communications manager or the

person responsible for maintaining your switchboard to find out what

facilities are available.

The telephone allows the following values to be set: 90ms, 120ms, 180ms,

300ms, 600ms and 1000ms

To set the right Flash value:

♦ press the SET/HOLD button. The display

will show - 0 1 2 3 4 5 6 7 -.

♦ Press the 2 button. The display will show

an actual setting. The factory setting is

600ms.

♦ Press the UP/+ or DOWN/- button to

select the right value.

♦ Press the SET/HOLD button to confirm

the setting.

♦ Press the DEL/TIME button. The

telephone will return to standby mode.

If the DEL/TIME button is not pressed, the

telephone will return to standby mode after

several seconds. The setting will be stored.

DEL/TIME

SET/HOLD

UP/+ DOWN/-

DEL/TIME

BC DEF

GHI JKL MNO

PQRS TUV WXYZ

OPER