User guide

21
III. Using the telephone LJ-100
2. Press the 5 button. The display will show
AL 123.
3. Press the 1 button to set the first alarm.
The display will show symbol AL 1OFF.
Alarm is off.
4. Press the */. button to switch alarm on.
The display will show AL 1 12-00. The
first digit of the clock will flash.
5. Using the keypad, enter the hour and
minute. For example, if you wish to set
15:37, press the following digits 1537.
6. Press the SET/HOLD button. The display
will show AL 123.
7. Press the 2 button. The display will show
symbol AL 2OFF.
8. Repeat steps 4 and 5 to set the second
alarm.
9. Press the SET/HOLD button. The display
will show AL 123.
10. Press the 3 button, if you wish to set the
third alarm. The display will show
AL 3OFF.
11. Repeat steps 4 and 5 to set the third
alarm.
12. Press the SET/HOLD button. The display
will show AL 123.
13. Press the SET/HOLD button once more to
confirm the setting. The display will show
– 0 1 2 3 4 5 6 7 -.
14. Press the DEL/TIME button. The
telephone will return to the standby mode.
If the DEL/TIME button is not pressed, the
telephone will return to standby mode after
several seconds. The setting will be stored.
Note!
You do not have to set three alarms . After displaying symbol
AL 123, select the alarm, you
wish to set.
The alarm signal will be played every day. The alarm can be switched off by
pressing the DEL/TIME button.
1
23
4
5
6
78
9
0
A
BC DEF
GHI JKL MNO
PQRS TUV WXYZ
/
OPER
/
=
SET/HOLD
DEL/TIME