User guide

IV. Clip (Caller ID)- Calling line identification presentation LJ-100

To review all numbers:

! press the UP/+ button, the display will show the number stored in the

first memory location. After next pressing the UP/+ button, the display

will show date and time.

! Press the DOWN/- button, the display will show the number stored in

the last memory location. After next pressing the DOWN/+ button, the

display will show date and time.

! Use the UP/+ and DOWN/- buttons to review all numbers

Note!

If there are no numbers in the memory, after pressing one of the buttons, the display will show -

- - End - - -.

# How to delete Clip numbers

♦ To delete an individual number:

! press the UP/+ or DOWN/- button to

select the number you want to remove.

! Press the DEL/TIME button twice. The

number will be removed.

Using the UP/+, DOWN/- and DEL/TIME

buttons the remaining numbers can be

removed.

♦ To delete all numbers:

! press the UP/+ or DOWN/- button.

Press and hold the DEL/TIME button, until the

telephone will show - - - End - - -. After several

seconds, the telephone will return to standby

mode. All numbers will be deleted.

# VIP function

VIP function allows important CLIP numbers to be saved

from deletion. Every number, which is saved from deletion, will be indicated by

the “padlock” symbol.

Note!

When the „No-disturb” function is used, VIP numbers are treated very specifically. The

telephone will ring, when a signal is received from one of these numbers.

To save a number:

! press the UP/+ or DOWN/- button to

select the number to be saved.

UP/+ DOWN/-

DEL/TIME

UP/+ DOWN/-