User guide

IV. Clip (Caller ID)- Calling line identification presentation LJ-100

! Press the VIP/P button. The display will

show the VIP symbol.

! The above steps can be repeated for the

next number.

If no further buttons are pressed, the

telephone will return to standby mode after

several seconds. The settings will be stored.

To remove the VIP symbol :

! press the UP/+ or DOWN/- button to

select the VIP number.

! Press the VIP/P button. The VIP symbol

will disappear from the display.

The above steps can be repeated for the next

number.

# How to make a call from Clip memory

To make a call:

♦ press the UP/+ or DOWN/- button to

select the number.

♦ Now, press the BACK/÷

÷÷

÷. button. The

2-way speaker function will be switched

on and the number will be dialed

automatically.

♦ Replace the handset or press the

SP-PHONE button to end the call.

Special case!

It may happen, that the number identified was stored without a prefix, which is

necessary to make long distance calls. Your telephone allows a prefix to be

added at the beginning of the number automatically. A prefix is added after

pressing the BACK÷ button twice. In Poland, the prefix used is 0.

To make a call using a number without a

prefix:

♦ press the UP/+ or DOWN/- button to

select the number.

♦ Press the BACK/÷

÷÷

÷ button twice. The

2-way speaker function will be switched

VIP/PVIP/P

UP/+ DOWN/-

BACK/BACK/

SP-PHONE

UP/+ DOWN/-

BACK/BACK/