User guide

27
IV. Clip (Caller ID)- Calling line identification presentation LJ-100
on, the prefix will be added and the
number will be dialed automatically.
♦ Replace the handset or press the
SP-PHONE button to end the call.
# How to set the prefix
To enter the prefix:
♦ press the SET/HOLD button. The display
will show - 0 1 2 3 4 5 6 7 -.
♦ Press the 3 button. The display will show
CodE - 12 -.
♦ Press the 2 button. The display will show
0CodE - -.
♦ Using the keypad, enter the prefix.
♦ Press the SET/HOLD button to confirm
the setting. The display will show
CodE - 12 -.
♦ Press the DEL/TIME button. The
telephone will return to standby mode.
If no further buttons are pressed, the
telephone will return to standby mode after
several seconds. The settings will be stored.
To delete the prefix:
♦ press the SET/HOLD button. The display
will show - 0 1 2 3 4 5 6 7 -.
♦ Press the 3 button. The display will show
CodE - 12 -.
♦ Press the 2 button. The display will show
an actual setting.
♦ Press the */. button. The display will show
symbol 0CodE - -.
♦ Press the DEL/TIME button. The
telephone will return to the standby mode.
# How to set the local area code
At present, a local area code does not need to be entered to make local calls.
This function can only be used to specify local numbers. Entering a local area
code in the memory removes it from all numbers, which belong to the same
area.
SP-PHONE
DEL/TIME
SET/HOLD
1
23
4
5
6
78
9
0
A
BC DEF
GHI JKL MNO
PQRS TUV WXYZ
/
OPER
/
=