User guide

30
VI. Help LJ-100
VI. Help
Please read this Troubleshooting Guide in case of difficulty.
♦ No signal in the the handset:
! check that the telephone is connected to
the telephone line.
♦ No dial tone:
! check that the telephone is connected to
the telephone line,
! check that the DIAL MODE T/P switch is
in the correct position.
♦ In standby mode (when the handset is
on the base unit), the display shows
nothing:
! check that batteries are correctly inserted
into the battery compartment,
! the batteries may be dead.
♦ The telephone rings quietly:
! check that the RINGER Hi/Low switch is
in the correct position.
♦ Unable to switch on the 2-way
speakerphone function:
! the batteries are dead,
no batteries in the battery compartment.
♦ No CLIP:
! Clip function is not activated by your
Provider.
♦ Alarm function does not work:
! check that there are batteries are in the
battery compartment,
! the batteries may be dead.