User guide

7
II. Getting started LJ-100
II. Getting started
# How to connect the batteries
♦ Remove the cover of the battery
compartment on the underside of the base
unit.
♦ Fit three 1,5V AA batteries,
♦ Replace the battery compartment cover.
Note!
Instead of batteries, the adaptor to the DC9V socket, which is placed on the side of the base
unit can be connected. The parameters of the adaptor must be as follows:
! inside voltage –
U
IN
= 230V, f =50 Hz
! outside voltage–
U
out
= 9V DC
! current
I
outmin =
100 mA
! standard plug (
Φ =2.1 mm)
with „-” inside.
Adaptor is not in complete!
# How to mount the table stand
See below picture.