User guide

11
III. Using the telephone LJ-102
If the SET/CE button is not pressed after
setting the minutes, the telephone will
return to standby mode after several
seconds. The settings will not be stored.
# Ringer volume control
The volume at which the base unit will ring
for an incoming call can be adjusted.
To select the volume you prefer:
♦ move the RING Hi/Low switch to:
! Low position– low volume
or
! Hi position– high volume
# How to select the ringer melody
One ringer melody can be selected from
among 16 ringer melodies. The settings
tONE 1-6 indicate the normal ringers and
settings tONE 7-16 indicate the melody
ringers.
To select one ringer:
♦ press the FLASH/RING/±
±±
± button, the
display will show tONE 1.
♦ Press the UP/x or DOWN/÷
÷÷
÷ button to
select the right ringer sound.
♦ Press the DEL/+ button. The setting will
be stored and the telephone will return
to standby mode.
If no further buttons are pressed, the
telephone will return to standby mode after
several seconds. The settings will be stored.
FLASH /RING /
UP / x DOWN /
DEL / +