User guide

18
III. Using the telephone LJ-102
# Flash function
This allows various switchboard facilities such as call transfer and
conference calls to be used. Contact your communications manager or
the person who maintains your switchboard to find out what facilities are
available.The telephone allows the following values to be set:100ms,
300ms, 600ms and 1000ms.
To set the right Flash value:
♦ press the SET/CE button. On the display
will show SEt 1 dAtE.
♦ Press the UP/x four time. The display
will show SEt 5 FLASH.
♦ Press the SET/CE button. The display
will show FLASH 300. The digit 300
will be flashed. This is a factory setting.
♦ Press the UP/x or DOWN/÷
÷÷
÷ button to
select the right Flash value.
After selecting the value:
! press the SET/CE button to confirm the
setting
and
! press the DEL/+ button to return to the
standby mode.
If the SET/CE button is not pressed, the
telephone will return to standby mode after
several seconds and the settings will not be
stored.
How to transfer a call.
To transfer a call from one internal
number to another:
♦ press the FLASH/RING/±
±±
± button.
♦ Enter the number to which you want to
transfer the call.
♦ Replace the handset on the base unit.
SET / CE
UP / x
UP / x DOWN /
SET / CE
FLASH /RING /
1
2
A
BC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
/
0
/
=
DEL / +