User guide

III. Using the telephone LJ-102

♦ Press the SET/CE button. The digits

indicating the minutes will begin to flash.

♦ Press the UP/x or DOWN/÷

÷÷

÷ button to set

the right minutes.

♦ Press the SET/CE button to confirm the

setting. The display will show an icon

indicating the ringer is turned off.

For example:

if you want to switch the ringer off for 5hours

and 25 minutes, the following setting should

be entered: 05--25.

Note!

a) If you have an activated CLIP service, all numbers will be stored in memory.

b) Remember, that the flashing RING indicator also informs of incoming calls.

♦ To switch the „No disturb” function

off, reset the clock.

# Calculator

Your telephone may be used as calculator. To switch the calculator on/off

press the left side of the CAL/ARD button. After pressing this button, the

display will show the digit 0.

Below, there is the description of all button functions:

♦ the UP/x button– multiplication,

♦ the DOWN/÷

÷÷

÷ button- division,

♦ the DEL/+ button- addition,

♦ the OUT/- button- subtraction,

♦ the SET/CE button– clearing of data,

♦ the FLASH/RING/±

±±

± button- addition and subtraction,

♦ the */. button– adding a decimal point,

♦ the #/= button- result/sum.

Note!

If the calculator function is not used for about 20 seconds, the telephone will return to the

standby mode automatically.

SET / CE

UP / x DOWN /