User guide

30
VI. Help LJ-102
VI. Help
Please read this Troubleshooting Guide in case of difficulty.
♦ No signal in the the handset:
! check that the telephone is connected to
the telephone line.
♦ No dial tone:
! check that the telephone is connected to
the telephone line,
! check that the MODE T/P switch is in
the correct position.
♦ In standby mode (when the handset
is on the base unit), the display
shows nothing:
! check that the batteries are in the
battery compartment,
! the batteries may be dead.
♦ The telephone rings quietly:
! check that the RING Hi/Low switch is in
the correct position.
♦ Unable to switch on the 2-way
speakerphone function:
! the batteries are dead,
! no batteries in the battery compartment.
# Important advice
♦ Never use your telephone during a
thunderstorm. Unplug it from the
telephone line and the mains socket
when there are storms in your area
♦ The telephone should not be installed
near a sink, bath or shower. Electrical
appliances can cause serious injury if
the user is wet or standing in water.