User's Guide

Darwin Tech LLC DTUSB5V1-BLE BLE Dongle User Guide

Windows X Installation Instructions:

1. Connect the Darwin Tech Dongle to an open USB port.

2. The Dongle firmware is automatically installed

3. Browse to the Device Manager and view “Ports (COM & LPT)

a. You should see “Silicon Labs CP210x USB to UART Bridge (COMx)

b. Take note of the port.

PAGE 1
Darwin Tech LLC DTUSB5V1-BLE BLE Dongle User Guide Windows X Installation Instructions: 1. Connect the Darwin Tech Dongle to an open USB port. 2. The Dongle firmware is automatically installed 3. Browse to the Device Manager and view “Ports (COM & LPT) a. You should see “Silicon Labs CP210x USB to UART Bridge (COMx) b. Take note of the port.
PAGE 2
Note: This device is designed to be integrated into a system using the command instructions detailed in the documentation links below. Documentation: https://www.silabs.com/documents/public/quick-start-guides/qsg139-getting-startedwith-bluetooth.pdf https://www.silabs.com/documents/login/application-notes/an1042-bt-ncp-mode.pdf https://www.silabs.com/documents/public/reference-manuals/bluetooth-apireference.pdf Additional Drivers: For operating systems besides Windows X, see the link below. https://www.
PAGE 3
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.