SU01 User Manual
Requirements: Android 5.0 and above IOS 9.0 and above Supports Bluetooth BT 3.0 APP download: M2 WEAR - IOS/Android phone users: Scan the QR code to download and install the application. - Android: Search for “M2 wear” through Play Store to download and install the application. - Apple: Search for “M2 wear” through the App Store to download and install the app. Initial use - To ensure the normal use of the watch, please charge it first. - Connect the poles of the cable to the poles of the watch.
app and make sure you have Bluetooth and GPS enabled on your phone. The app prompts you to give permission for notifications. Tap add device, search for device name, and select it to connect to. - Bluetooth connection: Bluetooth must be enabled on the watch. Enter the Bluetooth of the mobile and look for the name of the device. Select pairing.
- Call log: You can view the history of calls made. - Application notifications: The notifications received on the mobile phone will also be sent to the watch. - Exercise: In the sports menu (running, walking, cycling, climbing) select an exercise and the recording of exercise time, distance, calories and heart rate will begin. - Pedometer: Record the steps of the day. The data is reset every time at midnight. - Sleep Recording: Activate Sleep Recording to get a picture of its quality.
- Alarm clock: Set the alarm clock from the application and the clock will vibrate at the time you set to alert you. - Settings: You can turn vibration on / off - Style: You can change the style of the user interface. - Info: Find the MAC address, Bluetooth name, and device version. - Change brightness: Change the brightness depending on the environment. - QR Code: Scan and download the application. - Reset: Reset your device to its factory settings.
2) If the Bluetooth connection is unstable during operation, try restarting the watch and connecting it to the mobile again. Be sure to turn on the automatic start for the smartwatch application, in the settings of your mobile phone. Also turn off the battery optimization (without restrictions) for the specific application, so that the continuous application-smartwatch communication is not interrupted. 3) If there is a problem with the watch or its use, please contact the store where you purchased it.
gives more than 5v == 1A to charge the device. If you use a charger larger than 1A for charging, the circuit and / or battery may be damaged. 8) Once the watch is charging, disconnect the cable from the power supply to prevent a short circuit if it comes in contact with conducting objects. 9) Do not leave the peripherals and accessories in areas where the temperature is too high or too low. Otherwise the device may malfunction. 10) Avoid hitting the device to reduce the risk of damage.
