User manual

7
ACTION-525
- 2-way, full-range system
- 2 x 15" bass loudspeaker, 15MI (2,5" VCD)
- Compression driver with titanium diaphragm, M-44 (1,75" VCD)
- Two steel-reinforced handles
The ACTION-525 is a 2-way passive full range loudspeaker utilizes
two 15” bass loudspeakers for extra low frequency punch and higher
SPL. High frequencies are handled by a 1” compression driver with
titanium diaphragm. The trapezoidal cabinet is constructed using Birch
plywood and protected with a hard-wearing black paint finish. Two bar
handles and a steel grille sealed against corrosion using a polyamide
powder coat finish are provided. Rigging points provide a safe and
simple way to fly the ACTION-525 cabinets.
ACTION-S18
- Bass-reflex subwoofer system
- 18" low frequency transducer, 18FW (3" VCD)
- Precise and powerful bass reproduction
- Top located pole mount socket
The ACTION-S18 bass system incorporates a 18” low frequency
transducer with a 3 " voice coil mounted as a direct radiator into a bass-
reflex cabinet. The loudspeaker is protected by a perforated steel grille,
sealed against corrosion using a powder coat finish. The ACTION-S18 is
designed for use in biamped systems. A top located pole-mount socket
permits mounting full-range systems above the ACTION-S18 and two bar
handles makes moving easy.
ACTION-S218
- High output bass-reflex subwoofer system
- Twin 18" loudspeakers, 18FW (3" VCD)
- Durable black paint finish
- Side located bar handles
This high power bass-reflex subwoofer system uses dual 18" bass
loudspeakers equipped with 3" voice coils. The exceptional power
handling capacity and efficiency provide high sound pressure levels of
powerful bass. Two hand locations facilitate handling. The cabinet is
designed to be stacked in the vertical position in order to reduce the
units "on-stage" footprint.
ACTION-515
- Two-way, full-range system
- 15" bass loudspeaker, 15MI (2,5" VCD)
- Compression driver with titanium diaphragm, M-34 (1,4" VCD
- Asymmetric enclosure design for stage monitor use
- Built-in rigging points (eyebolt based)
- Stand mountable with angle double (0º and -10º)
This 2-way passive full-range loudspeaker utilizes a 15” low
frequency transducer and a 1” exit compression driver with titanium
diaphragm. The cabinet is constructed of Birch plywood and finished
with an environmentally friendly black paint finish. Two bar handles are
provided and a steel grille protects components. A 35mm tripod socket
with angle double (0º and -10º) allows for stand mounting. Rigging
points provide a safe and simple solution for suspending the ACTION-
515.
Manual del Usuario / action 500 series / User’s Manual