Installation manual

Hills Reliance Control Panel
Thank-you for choosing the Hills Reliance Control Panel!
The Hills Reliance security control panel from Hills Industries represents a new approach to security system design.
Drawing on experience from the world market, Hills has developed the most flexible, durable, and user-friendly control ever
seen in our industry. Featuring sophisticated software that allows up to 99 users to interface with 128 zones, 8 areas, and a
host of integrated fire, access, verification, and input/output modules, all reported with the Contact I.D. formats. The
modular design establishes a logical solution for ease of expansion. Up to 32 modules can be added to expand the
capabilities of the Hills Reliance.
NZ Telepermit Notice
Warnings
The equipment should be installed by
qualified SERVICE PERSONNEL only
The equipment should only be operated with
an approved power adapter with insulated live pins
CAUTION – RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF BATTERIES ACCORDING TO THE INSTRUCTIONS.
CONTACT YOUR INSTALLER FOR REPLACEMENT BATTERIES.
When installed as directed, this product conforms to the standards set by
Standards Australia on behalf of the Australian Communications Authority (ACA)
N4131
Disclaimer
The content of this document has been prepared to the best of our knowledge, provided “as is” and is subject to change
without notice. Hills Industries does not guarantee technical accuracy beyond the date of publishing. For the latest
information please enquire about attending one of our Hills Reliance training courses.
Copyright Notice
This work is copyright Hills Industries 2009. Apart from any use as permitted under the Copyright Act 1968, no part may be
reproduced by any process, including photocopying, scanning or other means, without prior written permission from Hills
Industries. Creation of derivative work unless agreed to in writing by the copyright owner is forbidden.