Installation manual

Programming Example Figure 1 - Numerical Data (Binary)

Programming Example Figure 2 - Option Selection Data

Enters the previous

programming “feature”

Returns to the “feature”

ust programmed.

Advances to the next

programming “feature”

To change data in a segment,

enter the data followed by []

Pressing [#] will exit a feature

without changing the data in

the current segment

Zone 1 LED = 1

Zone 4 LED = 8

}

Data = 9

Zone 2 LED = 2

Zone 7 LED = 64

}

Data = 66

Feature 16 - Segment 1

1 = Quick Arm

2 = Re-Exit

3 = Force Arm

4 = Silent Code Pad Panic

5 = Audible Code Pad Panic

6 = Code Pad Fire

7 = Code Pad Medical

8 = Code Pad Multiple

9 = Code Attempt Tamper

LEDs show Options enabled

Press the key on the numeric Code Pad that corresponds

to the option you wish to enable/disable. When an LED is

“on”, an option is enabled; when “off” the option is

disabled. For example: With the 1, 5, & 7 LEDs “on”,

Quick Arm, Audible Code Pad Panic and Code Pad

Medical are enabled.

1 4

5 7