Installation manual

© Hills Industries 2009 Page 40
Feature 36 new Days of the Week for Auto-Arming in Areas 1 - 8
Feature 36 selects which days of the week each area will auto-arm. Segment 1 is for area 1, and Segment 8 is for area 8.
Requires Features 33, 34 and 35 to be programmed to determine the Open Window.
If auto-arm is enabled, the panel will auto-arm the selected area at the Closing Time on the selected day. Note that there
may be a few minutes of delay depending on the site and programming. If a zone is faulted when the panel tries to auto-
arm, the zone will be bypassed. If disarmed during the Close Window, the panel will check every 45 min and try to re-arm
and keep the area secure
Option 8 relates to a retry timer. If there are zones faulted after disarming during the Close Window, the panel will wait until
there is 45 continuous minutes of no activity (i.e. Ready status) then auto-arm. The retry timer is not adjustable. Enable
option 8 to disable the retry timer, this will result in the panel arming after 45 min after disarming without waiting.
Users can stop/delay the auto-arm by entering their code during the exit time, no event log is recorded for the user code
entered.
User 97 is reported for auto-arm.
The process is:
Closing Time  Auto-Arm and unsealed zones bypassed  Disarm  Check if within Close Window  If Retry Timer
enabled, wait for 45 min continuous ready status  Else wait 45 min  Warning Time  Exit Time  Re-arm Area
Segments 1-8 Areas 1 – 8
1
Auto-Arming on Sunday
2
Auto-Arming on Monday
3
Auto-Arming on Tuesday
4
Auto-Arming on Wednesday
5
Auto-Arming on Thursday
6
Auto-Arming on Friday
7
Auto-Arming on Saturday
8 new
Disable Retry Timer (i.e. arm after 45 min regardless of activity)
Feature 37 new Area 1 – Account Code
Segments 1-6
10 10 10 10 Reserved new Reserved new
Feature 37 contains the account code sent when area 1 is reported. If Feature 37 is left as default (all ‘10’s), then the
system account code (Feature 5) will be used.
Only available on Reliance 12 and Reliance 128.
Areas 2 – 8 Programming Options
Feature 38 new Area 2 – Account Code
Segments 1-6
10 10 10 10 Reserved new Reserved new
Feature 38 contains the account code sent when area 2 is reported. If Feature 38 is left as default (all ‘10’s), then the
system account code (Feature 5) will be used.