Installation manual

© Hills Industries 2009 Page 41
Feature 39 new Area 2 – Option and Report Selections
Feature 39 is used to enable certain options that can be accessed or are visible to the user from the code pad of the
system. In addition, certain communicator reports are enabled. Each of these options can be enabled by area 2.
If the option selection feature for any area is left blank, that area will use Feature 16 for the option selection.
Segment 1
1
On enables the Quick Arm option
2
On enables the Re-exit option
3
On enables the Force Arm option
4
On enables the Silent Code Pad Panic option
5
On enables the Audible Code Pad Panic option
6
On enables the Code Pad Fire option
7
On enables the Code Pad Medical option
8
On enables the Code Pad Multiple Code Attempt Tamper option
Segment 2
1
On enables the LED Extinguish option.
2
On enables the Require Code for Bypassing option
3
On enables the Zone Bypassed Sounder Alert option
4
On enables the AC Power/Low Battery Sounder Alert option
5
On enables Bypass toggle
6
On enables Silent Auto-Arm
7
On enables the Universal Arming option
8
On enables the One Key Partial Mode Disarm
Segment 3
1
On enables Opening and Closing reports
2
On enables Zone Bypass reporting
3
On enables Zone Restore reporting
4
On enables Zone Trouble reporting
5
On enables Zone Tamper reporting
6
On enables the Cancel option
7
On enables Recent Closing option
8
On enables Exit Error option
Segment 4 new
1
On enables Late To Close (requires Feature 6 to be set to Contact ID)
2
On enables Auto-Arm In Partial
3
Reserved
4
On enables Disable Bypass For Force Arm Zones
5
Reserved
6
Reserved
7
Reserved
8
Reserved
Segment 5 new
1
Reserved
2
Reserved
3
Reserved
4
Reserved
5
Reserved
6
Reserved
7
Reserved
8
Reserved